OneHeat Limited

Boiler Installations

Professional new boiler installations and system upgrades across South and West Yorkshire. Full site survey, product guidance and Gas Safe certified installation with practical finance options.

The right boiler for your home, fitted properly

Our Gas Safe-registered engineers lead every installation, backed by City & Guilds qualifications and CHAS health & safety standards. We run a full site survey, match boiler types to property age and layout, and carry out certified installation and commissioning. Finance plans and landlord certification available.

We’re heating engineers based in Rotherham, serving Wickersley, Maltby, Rawmarsh and the surrounding area. Our boiler installation in Rotherham covers straight swaps, conversions and full system upgrades. You can see every town we cover on our areas page.

The right boiler for your home, fitted properly

294 Five-Star Reviews

Google
“I couldn't be happier with these guys. Faced with a potentially chunky bill and a big job, Ricky assessed the situation and helped me massively. The job became much smaller, as did the bill. I even got it done before it would have been …”— Google

How It Works

01

Site survey & recommendation

A Gas Safe engineer visits to assess pipework, heat loss, existing controls and flue options, then recommends boiler models and a clear scope of work.

02

Certified installation day

Our team install the chosen appliance, replace or adapt pipework where needed, fit controls and complete all gas connections to Gas Safe standards.

03

Commissioning & handover

We pressure-test and commission the system, demonstrate operation and controls, supply paperwork and issue any required Gas Safe certificates.

What you get with OneHeat

Local South Yorkshire engineers

With regular work across South and West Yorkshire, our team understands local housing stock, for quicker response and smoother installs.

Qualified, accredited & insured

All engineers are Gas Safe registered, City & Guilds qualified and CHAS accredited; we’re IDEAL Max accredited and can issue landlord gas safety certificates.

Finance and aftercare

Practical finance plans and a finance calculator make spreading the cost straightforward, and our award-winning team provides ongoing servicing and rapid call-outs.

What's included: a full site survey, product selection guidance, supply of the chosen boiler and components, certified installation, commissioning and handover paperwork. Installations cover conventional boilers, combi replacements and system upgrades for Victorian terraces, semi-detached homes and modern new-builds.

How to book: arrange a survey or discuss models, and we can also run through finance options and provide a written estimate after the survey.

Which boiler is right for your home?

  • Combi: heats water straight from the mains, with no hot water cylinder or loft tank. It suits most terraces, flats and smaller semis with one bathroom, and frees up the airing cupboard.

  • System: heats a hot water cylinder, often a mains-fed unvented one. It suits larger semis and new-builds with two or more bathrooms, where several taps and showers run at once.

  • Conventional: works with a cylinder and a cold water tank in the loft, as many older terraces and semis still do. Keeping it can be the simplest choice where mains pressure is low.

We fit boilers from makers including Ideal, as an IDEAL Max accredited installer, plus Vaillant, Glow-worm and Worcester Bosch. The survey checks your water pressure, hot water use and space before we recommend one.

What affects the price, and how long it takes

You get a written estimate after the survey, before any work starts. The main things that shape the cost are:

  • the boiler type, brand and output you choose

  • a straight swap, or a conversion from one type to another

  • extra pipework, new radiators or a new cylinder

  • the flue route, and whether a plume kit is needed to direct the steam away from windows or neighbours

Timings follow the same pattern. A straight swap is the quickest job, usually done in a day. A conversion to a combi, which means removing the cylinder and tanks, or moving the boiler to a new spot takes longer, and the survey confirms how long.

The paperwork you'll receive

  • Building Regulations notification: we notify your local council through the Gas Safe Register, and a Building Regulations Compliance Certificate arrives by post a few weeks later.

  • Commissioning checklist: the Benchmark checklist in the boiler manual, completed with the readings from your installation.

  • Warranty registration: we register the boiler with the manufacturer where required, and the warranty length depends on the boiler you choose.

  • Gas Safe certificates: any certificates the job requires, and a landlord gas safety certificate for rental properties if you need one.

Keep them together, as you'll need them for the warranty and if you sell your home.

What our customers say

"Contacted One heat thru Google Sunday evening ,Monday morning I received phone call from them ,Monday afternoon had home visit and by 15.30 Wednesday I had a new boiler installed and working. One heat were efficient from start to finish and very friendly,informative and professional throughout ." - Taryna, Google

"He did not pressure me in to a decision, but did advice that I had probably had our monies worth out of it after 23 years front when we had it put in. Within days he was back, new boiler installed with minimal mess." - Craig, Google

Gas Safe Registered
Checkatrade
CHAS accredited
City & Guilds Accredited
REFCOM
Ideal Max white
Mitsubishi Partner
Worcester Bosch

294+

Five-Star Reviews

8

Specialist Services

8+

Industry Accreditations

13+

Areas Covered

Frequently Asked Questions

Most straight swap installations are completed in one day, with commissioning and system checks finished before we leave. More complex installs or system upgrades (radiator replacement, additional pipework) may take longer and will be confirmed during the site survey.

Yes. Removal and responsible disposal of the old boiler are included in the installation scope where access allows. Any additional works discovered during the survey that affect disposal will be discussed and agreed before work proceeds.

We complete full commissioning and issue the necessary Gas Safe paperwork on completion. Manufacturers’ warranties depend on the chosen boiler; we explain coverage at the survey and register appliances where required.

Yes. OneHeat offers practical finance plans and a finance calculator to help you budget. Options are discussed at the survey so you receive a clear quote with payment choices included.

Absolutely. Our engineers are authorised to issue Landlord Gas Safety Certificates after installation and servicing, making us a convenient choice for landlords across South Yorkshire.

Usually, yes. Radiators in good condition can stay, especially once the system is cleaned to clear sludge, which protects the new boiler. Radiators that are leaking, blocked or too small for the room are worth replacing at the same time, and we'll point out any at the survey. A power flush may be recommended for older systems.

Other Services We Offer

What Our Customers Say

“I couldn't be happier with these guys. Faced with a potentially chunky bill and a big job, Ricky assessed the situation and helped me massively. The job became much smaller, as did the bill. I even got it done before it would have been …”

— Tony Mill

GoogleGoogle2026-10-16
“Excellent service prompt, knowledgeable, clean and tidy.Would recommend to anyone.”

— Garry Lowe

GoogleGoogle2026-10-16
“Ricky and Adam were very good and proficient at what they did. And we’re very friendly and kind I recommend them both at whatever they do . Thank very much Ricky and Adam .”

— Doss Dyson

GoogleGoogle2026-10-16

Arrange your site survey

Book a site survey with a Gas Safe engineer to get a tailored recommendation and written quote, at a time that suits you.

Book a survey